Drawings of the components show their overall dimensions as well as the placement of various features which must be drilled or cut. Drawing files are provided in two formats: 1) the original odg files, and 2) pdf version of the drawing files. If you wish to use the drawings as is, the pdf versions are perfectly adequate. If you wish to modify the drawings for your own customizations, then download the odg files and edit them in LibreOffice.
The parts list is given in the spreadsheet, PartsList.ods.
Examples of some sources of materials for a few of the major parts are
given in the list below.
The drill bit sizes and drill hole depths corresponding to the numbered holes on the
drawings are given in the table below.
| Component | Hole # | Bit Size | Depth (in.) | Screw |
| x = through hole | ||||
| Base Plate | 1 | 5/32 | x | #6-3/4 |
| 2 | 5/32 | x | #6-3/4 | |
| 3 | 5/32 | x | #6-3/4 | |
| 4 | 5/32 | x | #6-3/4 | |
| 5 | 5/32 | x | #6-3/4 | |
| 6 | 5/32 | x | #6-3/4 | |
| 7 | 5/32 | x | #6-3/4 | |
| 8 | 5/32 | x | #6-3/4 | |
| 9 | 5/32 | x | #6-3/4 | |
| 10 | 5/64 | 1/2 | #4-1/2 round head | |
| 11 | 5/64 | 1/2 | #4-1/2 round head | |
| 12 | 5/64 | 1/2 | #4-1/2 round head | |
| Grating Holder (Piece A) | 1 | 7/64 | 1/2 | #6-3/4 |
| 2 | 7/64 | 1/2 | #6-3/4 | |
| Slit Plate | 1 | 1/8 | x | #4-1/2 round head |
| 2 | 1/8 | x | #4-1/2 round head | |
| 3 | 1/8 | x | #4-1/2 round head | |
| Mask Plate | 1 | 7/64 | 1/2 | #6-3/4 |
| 2 | 7/64 | 1/2 | #6-3/4 | |
| 3 | 1/8 | x | #4-5/8 round head | |
| 4 | 1/8 | x | #4-5/8 round head | |
| 5 | 1/8 | x | #4-5/8 round head | |
| 6 | 1/8 | x | #4-5/8 round head | |
| Top Plate | 1 | 5/64 | 1/2 | #4-5/8 round head |
| 2 | 5/64 | 1/2 | #4-5/8 round head | |
| 3 | 5/64 | 1/2 | #4-5/8 round head | |
| 4 | 5/64 | 1/2 | #4-5/8 round head | |
| Hand Grip | 1 | 3/32 | 3/4 | #6-3/4 |